• 24H 2/1 lacing pattern equalizes spoke tension, reduces fatigue related stress on the rims and spokes, reduces weight over traditional wheel architecture
• Initially available with Center Lock hubs only
• Made in the USA hubs - assembled in Asheville, NC
• Front Hub: 2 bearings with external teflon seals. 100mm QR, 9thru, 12mm, and 15mm axle
• Rear Hub: 4 bearings with external Teflon seals and silicone freehub seal. 135mm QR, 10x135, 12x135, and 12x142 axle options
• Driver: Shimano HG, Campagnolo or SRAM XD-R - 60 point, 6 degree engagement, 3 pawl mechanism
• Spokes: Industry Nine 2.9mm/2.7mm Aluminum
• Spoke count: 24H F&R  
• Standard Colors - all Black hubs and spokes
• Custom Colors* -  Orange, Purple, Turquoise, Lime, Gold, Green, Blue, Red, Pink, Silver and Black hubs and spokes *Upcharges apply
• Enduro XD-15 Hybrid Ceramic bearings - include lifetime warranty (Upcharges apply)

Industry Nine is sourcing an improved bearing from ENDURO. The ENDURO LLU bearings are equipped with a full contact, dual lip seal. These are properly installed with the light grey seal side toward the outboard side of the component you are installing them into. This provides additional protection towards the side most exposed to the elements.

CARBON PRODUCT LIFETIME WARRANTY
Industry Nine has gone the extra mile to ensure we offer the best road, gravel and mountain carbon wheels available. We are so confident in our wheels that we are now offering a limited lifetime warranty on all carbon wheelsets sold after January 1, 2018.

The limited lifetime warranty applies to all Industry Nine branded complete carbon wheelsets, applicable to the original owner. Under the limited lifetime warranty, Industry Nine certifies all wheels to be free from defects in materials and workmanship. Wear and tear of common and serviceable wear items is not covered.

Industry Nine carbon wheel systems are engineered to be ridden every day and are designed and tested to ensure the strength of the wheels exceed the loads incurred during their intended use1. You can rest assured that if you are on an Industry Nine carbon wheelset, we have you covered.

The warranty applies to all original owners who purchase their wheels from an Industry Nine Authorized Dealer or directly from Industry Nine; wheels purchased through third-party sites will be excluded from the warranty. Any wheel that has been altered, improperly maintained or installed, or modified from its original build will not be eligible for this warranty.

1 If you are riding your wheelset within the scope of their designated use, we will protect your purchase. We can not cover under warranty situations of intentional damage, grossly improper use or acts of god. Shipping costs to our service location will not be covered under warranty, return shipping back to the rider is covered.

ALLOY PRODUCT WARRANTY
We offer a two-year warranty against defects in materials or workmanship on all Industry Nine products. Industry Nine will repair or replace, at our discretion, any affected components or assemblies. The warranty will apply to stems, MatchStix, hub shells, axles, drive mechanisms, spokes, and rims.

The intended application of Industry Nine products are single rider bicycles. Industry Nine will not be able to provide warranty support or assume liability for hubs or wheels that are utilized outside of their intended purpose. This warranty covers materials and workmanship but does not cover normal wear and tear, such as bearing wear, or damage due to lack of proper service intervals.

Spokes will be warranted against defects, but not trail accidents, drivetrain/frame mechanical failure, or foreign object intrusion.

Aluminum rims are covered under the two-year warranty but are not warrantied for impact or crash damage. Use of non-authorized aftermarket adaptors and/or modification of axles, hubs, spokes or any other component may result in a voided warranty. Modification of rim finish or graphics by use of stripping solvents or chemicals will void rim warranty.

We believe in our product and will try to give Industry Nine customers the benefit of the doubt in any case where the cause of failure is undetermined.

STEM WARRANTY
Industry Nine Stems are covered under a two-year limited warranty against defects in materials or workmanship. This warranty applies to the original owner and does not cover crash damage, abuse, damage due to improper installation, cosmetic changes due to aging, or use of the product outside of its intended purpose.

Please keep in mind that bicycle parts are subject to impact damage and material fatigue over time and all bicycle products have a finite service life dependent on the type and frequency of use. We recommend that you have your stem and other cockpit components inspected at least once/year by a qualified mechanic to ensure rider safety.

Warranty claims are administered at the sole discretion of Industry Nine and warranty product must be returned to the Industry Nine dealer where the product was purchased or directly to Industry Nine and require an original receipt.

MATCHSTIX WARRANTY
Industry Nine Matchstix tools are covered under a two-year limited warranty against defects in materials or workmanship. This warranty applies to the original owner and does not cover crash damage, abuse, damage due to improper installation, cosmetic changes due to aging, or use of the product outside of its intended purpose.

Warranty claims are administered at the sole discretion of Industry Nine and warranty product must be returned to the Industry Nine dealer where the product was purchased or directly to Industry Nine and require an original receipt.