Lama Cycles - Bike parts distribution company
Things you need to know

NS Rotary Single Pro hub

NS Rotary Single Pro hub
Thanks for the fast resolve. Quite happy with your customer service right from the start
Edward. Moncton NB   Dec 10, 2012

2015 Jungle 32hNS15-188$399.99 $179.00AvailableAdd to my order
2015 Jungle 36hNS15-189$399.99 $179.00AvailableAdd to my order
2015 Blue 36hNS15-191$379.99 $179.00out of stock
Add selections

The Rotary is a real street/dirt mountain bike disc brake SS hub (135/10) using pure bmx technology. Say no to the heavy hubs taken straight from bmx catalogues with tiny & weak driver bearings & weak 3/8"-10mm axles. The Rotary hub is so light because we decided to shave any unnecessary weight to the limit without sacrificing the strength at all.
Instead of a long and weak 3/8 axle we used a bigger diameter alloy 7075 axle & steel hardware on the drive side to make it almost indestructible. Alloy axle was slightly redesigned to make it stronger than before, allowing perfect hub rolling long-life, no slowing down even overtightened. No more adjusting, no more unscrewing or stripped cone nuts - they are slip-on. No external threads to damage. Hollow 3/8 bolts with 17mm hex heads & 8mm Allen hex sockets will fully immobilise your wheel in the dropouts. The driver runs on a bushing eliminating the need to use tiny and week bearings. It's strong as hell and run smooth. Starting from 2013 Rotary Single Pro features an upgraded driver with separate springs for each pawl: 4 pawls, 4 springs. Engagement is really good this hub won't skip. Please also note that we added one special feature you were asking for - this hub is really loud!
  • material: 6061 alloy body, 7075 alloy axle & left cone, steel drive side hardware & bolts
  • O.L.D 135mm
  • compatible with all mtb frames (O.L.D 135  x 10mm or 3/8)
  • chain line: 51.5-52 mm
  • female oversize axle system + side bolts - this solution rules as it's light & strong!
  • hollow alloy 7075 axle
  • 2x #6902 sealed bearings (main hub bearings) & special light & strong bushing system inside driver
  • bolts: hollow, 17mm hex head and 8mm Allen hex sockets, 3/8x24tpi thread
  • 10T driver using bushing
  • 4 pawls & 4 springs, with 24 engagement points / each 15
  • slip-on cones, nothing to be adjusted, steel on drive side and alloy on disc brake side
  • disc brake mount IS (International Standard / 6-bolts)
  • available in 32h and 36h versions
  • weight: ~395g
Wheel building chart

NS Bikes
Octane one
Formula brakes
Industry nine components
Five ten
Copyrights 2012 Lamacycles Inc. All rights reserved - Online shop