Complete wheels now available in both 27.5 and 26" size. Pre-built wheels are available in two price levels. The Fundamental 26" wheel line level uses Rotary hubs, plain gauge stainless steel CN spokes (2.0mm) and Fundamental rims. The Enigma wheel line uses Rotary hubs, butted stainless steel MAC spokes (2.0-1.8-2.0) with XD Black Technology and the choice of new Enigma Dynamal 26"/27.5" or new Enigma Dynamal Lite 27.5" rims. New disc brake front wheel is compatible with both 20mm and 15mm forks.
All wheels are hand built and trued using brass nipples and a 32 spoke 3-cross lacing pattern.
Specs
Intended use: Freeride, downhill, dirt. Bombproof yet light rims
Material: Dynamal alloy blend with high hardness level, high strength and stiffness
Yield & tensile strength: +15% higher than previous Enigma models
Elongation at break: +25% higher than previous Enigma models
Sleeved connection (pressed and additionally bonded with epoxy)
Width: 31mm (external), 25mm (internal)
Height: 22mm
Designed for standard 3 cross lacing
Very hard material does not require the use of eyelets
NS Bikes quality high pressure resistant rim strap included
Valve hole: FV / Presta
Tubeless ready profile, *tubeless tape and valves are not included
Disc brake only
Size: 26" (559mm) and 27.5" (584mm)
ERD: 26": 529mm, 27.5": 554mm
Drilling: 32h
Rim weight 26": 560g anodised, 580g painted +15g NS rim tape
Rim weight 27.5": 585g anodised, 605g painted +15g NS rim tape
NON-BOOST
Need help choosing the right product?
Our team of riders and experts will be pleased to help you.
Specs
Size
Metric
Imperial
This is a size chart.
Geo
Metric
Imperial
Geometry of this bike.
Reach
Horizontal measurement taken from the middle of the bottom backet to the middle of the headtube.
Stack
Vertical measurement taken from the middle of the bottom bracket to the middle of the headtube.
Effective Top Tube
Horizontal measurement taken from the middle of the seatube to the middle of the headtube.
Actual Top Tube
True length of the top tube taken from the seatube along the toptup to the headtube.
Standover Height
Vertical measurement taken from the ground to the the middle of toptube.
Seat Tube Angle
Angle of the seatube.
Seat Tube Length
Lenght of the seat tube taken from the bottom bracket to the top of the seat tube (the measure is taken alongside the seat tube)
Headtube Angle
Angle of the headtube.
Headtube
Vertical lenght of the headtube.
Chainstay
Horizontal measurement taken from rear axle to the bottom bracket.
Wheelbase
Horizontal measurement between the two wheel axles.
BB Height
Vertical measurement taken from the ground to the bottom bracket (Never taken at sag).
BB Drop
Vertical measurement between the height of the axles and the height of the bottom bracket.